Motorised valves with electric actuators, for service on water plants, suitable to operating pressure from PN 16 PN 100.

On – Off Gate Valves
Gate valves are mainly designed to work as on-off valve, full open or full close.
The body, the top cap and the gate are in CARBON STEEL, the seats on the body and the gate are in WELDED STAINLESS STEEL.

Control and On-Off Globe Valves
The valves designed for general services are suitable to regulation and on-off services of water plants.
The body, the cap and the plug are in Carbon Steel while the seats are in STAINLESS STEEL.
For control services the valves are designed with a particular Parabolic Profile Globe that grants the best ratio “flow rate/opening”

Control and On-Off Butterfly Valves
The particular design for service on water plants guarantees a bi-directional hydro and pneumatic tightness.
The operating torque is the lowest if compared to other valves suitable to same applications.
The body and the disc are made in forged steel and the stem, with anti blow out device, is in STAINLESS STEEL (13% Chromium). Valves are suitable to operating pressure up to PN25.

On – Off Ball Valves
Main feature is its particular design. The ball enjoying the seats in Teflon, ensures a perfect tightness in both directions.
Valves are available in a wide range of materials, most common are CARBON STEEL for the body and STAINLESS STEEL for the ball.

Valves motorised with electric actuator
The special design of the actuator is suitable to those valves installed on critical positions of the plants, to those valves requiring remote control, to those big size valves with difficult manual operation.

Electric Actuator
Electric motor to IP67 and Class “F” insulation
Hand wheel for emergency operation
Travel limit switches and torque switches